Tailorbattery
Tailorbattery offer tailored solutions from a single cell to multi cell packs, customied
to your specification with your connectors - Tailorbattery will design, manufacture and supply for
your application, in any quantity - cost effective, application specific power source that will add
value to your products.
Primary
Alkaline:
Volume, or retail volumes. Suitable for most consumer electronic goods. All cell sizes including AAA, AA, C, D, 9V etc
Li Manganese Dioxide:
Suited for high current drain applications. High energy density at a terminal voltage of 3V. Widely used in
commercial/military products for high reliability, extended temperature tolerance, and pulse current capability.
Available in Coin / Button cells, and cylindrical sizes including 1/2AA, A, AA, B, C and D cell.
Also available in a high energy 9V replacement.
Li Thionyl Chloride:
Optimised for Extremely high energy density requirements. This primary battery chemistry offers the highest
commercially available energy for a given battery size. Suitable for commercial applications where operation/backup
is paramount at extremes of temperatures. High 3.6V terminal voltage and very high energy density, plus a 10 year
shelf life makes this technology the perfect solution. Various sizes including, 1/2AA, 2/3AA, AA, A, C, D, DD, plus
bobbin wound button type cells.
Li iron:
Available in retail and volume packs. This Chemistry is a direct, high energy replacement for Alkaline in many
applications. 1.5V terminal voltage makes this battery the optimum energy source for the most demanding high
current drain electronic goods. Lasts up to 6 times longer than standard alkaline in digital cameras.
Rechargeable
Ni - Cd:
Widest temperature range tolerance for rechargeable technology. Terminal voltage of 1.2V. Lower energy
density/unit volume, however Ni-Cd offers the advantage of providing maximum available power into near short
circuit loads at low cost. Cell sizes include AA, C, D etc
Ni - MH:
Ni-MH chemistry is the next step in Nickel based batteries, boasting higher energy density and no memory
effect resulting in an affordable, longer life, more durable solution for applications suited to 1.2V rechargeable cells.
Lead Acid:
High energy density/unit volume but has a greater mass. Very well suited to standby power applications where
reliability are a must. A robust power solution typically available in 6V, 12V, or 24V at capacities ranging
from 1.2A/h up to 100's of A/h
Li - Ion:
Highest energy density available from a rechargeable battery and a cell terminal voltage of 3.6V make this
chemistry the industry standard for modern electronic goods. Li-Ion offers small size and light weight power
for portable high drain devices.
Li - polymer:
Offers similar energy density to Li-Ion chemistry in a thinner form factor for slim line digital electronic
goods. Available in a huge range of different sizes. High pulse current capability as well as lowest self
discharge makes this battery ideal for designs with a high standby/pulse current ratio.
Tailor Battery:
Contact us
for full Technical Specifications, Custom Battery Packs, product types, sizes and availability
Tailor Battery home page
Downloadable PRODUCT Specifications (PDF format):
11.1V
BP-LP-11-CT148 Technical Data Lithium Ion Polymer 11.1V / 4000mAh
BP-LP-11-CT102 Technical Data Lithium Ion Polymer 11.1V / 270mAh
7.2V - Contact Us
3.7V
BP-LP-3-CT111 Technical Data Lithium Ion Polymer 3.7V / 170mAh
BP-LP-3-CT117 Technical Data Lithium Polymer 3.7V / 2100mAh
BP-LI-3-CT118 Technical Data Lithium Ion 3.7V / 2200mAh (includes PCM Flyleads and connector)
BP-LI-3-CT129 Technical Data Lithium Ion 3.7V / 750mAh
BP-LP-3-CT130 Technical Data Lithium Polymer 3.7V / 1800mAh
BP-LP-3-CT131 Technical Data Lithium Polymer 3.7V / 4200mAh
BP-LI-3-CT132 Technical Data Lithium Ion 3.7V / 2200mAh (Cell)