Daito
BE/SBM/BL/SBL series of fuses
These are radial shaped fuses so that it is superior in insulation on surface of board for no metallic exposure after board mounting. Since theses fuses are packed in tape and reel, they are effective for production with automatic machines. These fuses are designed to comply with IEC60127-4. Since this is international standards, it solves your conventional troubles to change fuses depending on export destination.
|
|
Type |
Rated voltage |
Rated current |
Breaking capacity |
Dimensions LWH [mm] |
Approved standards |
|
|
new ! BE |
AC125V DC63V |
1A-5A |
50A |
9×4×8 (5mm between terminals) |
cURus MITI IEC 60127-4 |
|
|
SBM Time-lag |
AC/DC125V |
2A~5.6A |
50A (The breaking capacity of 5.6A rated current fuse is 56A) |
9×4×8 (5mm between terminals) |
cURus TÜV MITI IEC 60127-4 |
|
|
BL |
AC250V |
1A-6.3A |
100A |
12.5×7.5×10 (7.5mm between terminals) |
cURus VDE SEMKO TÜV MITI IEC 60127-4 |
|
8A, 10A |
100A |
12.5×7.5×10 (7.5mm between terminals) |
cURus MITI |
|||
|
|
SBL Time-lag |
AC250V |
1A-4A |
100A |
12.5×7.5×10 (7.5mm between terminals) |
cURus VDE SEMKO TÜV MITI IEC 60127-4 |
